Line LE RBA by Van- review by Qorax

Devices database /
The Line LE comes in a nice black suede pouch, with two extra plexiglass tanks. No spare bag is included since all the O-rings are generic and the Screws are all M2, which can be inexpensively purchased locally.

Devices database: Line LE atomizer

A KSP (Key Selling Point) of the Line LE is also it’s «ease of rebuilding”. It is actually a novice’s Genny ~ and come whatever may it will wick well and chuck out the VTF by the nostrils (pun intended)! Just wrap a coil over the mesh wick, drop it into the wick hole, attach the coil legs in the terminals and bob’s your uncle! It is actually pretty fail safe!

A) PREPARE THE WICK
Devices database: Line LE atomizer

B) PREPARE THE COIL
Devices database: Line LE atomizer

C) UNIFY THE WICK & COIL
Devices database: Line LE atomizer

D) FILL THE TANK
Devices database: Line LE atomizer

E) VAPOR CHECK
Devices database: Line LE atomizer

There are certain KSPs of the Line LE (enumerated below) one of them being ~ it’s a Flavour Queen! Gennys are known for it, ya right! This one extrapolates that into a thousand times. And why not? With a 14mm body and that super reduced chamber — it produces some tasteful warm vapour indeed.

Devices database: Line LE atomizer

Devices database: Line LE atomizer

Devices database: Line LE atomizer

Devices database: Line LE atomizer

The pic above is me vaping the Line LE with an Ego type battery. So what the stock air hole is just 1.2mm, it yet produces tons of vapour — and the TH is right there where it should be for your nic level. And that’s with my first build of a 1.2Ω coil with the iTaste VV V3 cranked up all the way to it’s 11W limit.

Devices database: Line LE atomizer

And here I drop the coil resistance to 1Ω and maintain a steady 19W ~ the VTF is near similar (tho produces a tad more vapour) to my earlier build. The Line LE thus is a real performer! Sweet & Sexy!

Devices database: Line LE atomizer

Four KSPs of the Line LE:
1. Easy to Setup
2. Flavour at it’s best
3. Original and Affordable
4. It looks hot and so adorable!

Devices database: Line LE atomizer

PROS: Besids the four KSPs above ~ (1)Ease of use, (2)Wicks very well (no additional tilting necessary), (3)Performs equally well with low-powered batteries as well as high-powered mods, (4)User replaceable parts, (5)Lifetime Warranty, (6)Realtime modder’s support (via email and a responsive forum), (7)Vapor Wall Discount (check with me if you aren’t a member) ~ And I repeat: (8)it is Gorgeous!

CONS: (1)The 510 mouthpiece of the Line LE is little narrow, thus all drip tips may not fit, (2) Not specific to this genny, as all compact atties would be, the top cap here gets fairly warm — tending to „hot“ during continuous vaping, thus non-metal drip tips are preferable, (3)Plexiglass Tank, beware with tank cracking juices, (4)It could be a tight draw for few, b'coz of the 1.2mm air hole (could be drilled out easily tho) ~ And (5)The size, 14mm topper may not be for all.

Devices database: Line LE atomizer

Notwithstanding the dimensions — this genny means serious business! The centre wicking negates the requirement of aligning the air hole (the top cap is threaded anyway), which also makes it rock solid, as chances of mishaps due to a dislodged top cap isn't there. The wick hole is gigantic (3mm), make a hollow core mesh wick and there’s no way that it’d be underfed. I’m chain-vaping for days now and it has been keeping up perfectly. The unibody, together with some qualitative machining, a detailed finishing job and a simple but thoughtful design makes the Line LE a very elegant topper for our mods. It looks and feels better than many hi-end attys, minus a hi-end price tag! Yes, it is fairly inexpensive too!

Similar articles

0 comments

Only registered users can comment.